鈎索

此條目仍需進行內容補充，您可以幫助我們編輯和修訂以擴充其內容。

鈎索可以用於在地圖中位移。它是默認持有的裝備，在絕大部分地圖中它都必不可少。鈎索有以下功能：

鈎住特定方塊擺盪
鈎住其他玩家，將他們拖向自己，同時自己也會被反作用力稍微拉向他們

按下次要開火鍵（默認為鼠標右鍵）發射鈎爪（鈎索頭），鈎爪會攜帶鈎索一起飛行，鬆開該按鍵鈎索將會消失。

關於鈎索的基本屬性：

鈎爪在發射後將沿着直線飛行，直到它抓到玩家或牆
如果鈎爪一直沒抓到玩家或牆，它會在達到最大射程時消失
鈎爪具有出射速度，發射後不會立刻命中，而是在一定的延遲後才接觸目標
視覺效果上，鈎爪和玩家之間會有鈎索連接，鈎索提供了玩家和鈎爪之間的拉力，但是鈎索沒有碰撞箱
鈎索不會讓玩家原有的速度消失，而是在原有運動狀態上附加一個加速度
鈎爪很小，因此它可以從對角線穿過某些角落的牆縫

關於不同類型的方塊

下面列舉一些鈎索與方塊的交互：

Air or absence of the following blocks will let the hook right through
Unhookable tiles cancels the hook when hit
Hookable tiles which you can grab on with your hook and pull yourself towards it until you release the hook or get Frozen or Teleported.
Hook-through tiles ( + or + ), is a combination of a collision block in the game layer ( or ) and the hook through block in the front layer . This combination will not affect your hook. The hook will pass right through them like through air
Hook-stopper tile is the same tile as the Hook-through tile, but placed on air instead on collision. This block will cancel the hook like the unhookable tile. The difference to the unhookable tile is that tees and weapon projectiles don't collide with it.
The directional hook-through tile is rotatable and lets all hooks through in one direction and acts like the hook-stopper for hooks in the opposite direction.
The old hook-through tile (/) lets hook through, when placed next to a tile when hooking through in some angels.
Hook teleporter will teleport the hook to a different position on the map.

When your hook is active (anchored to a hookable block), your tee will be pulled towards the anchor point. There is no timer when hooking a block, so you can hold it for as long as you wish.

Hooking Tees

Hooking another tee will pull the tee towards you. Your tee will also be slightly pulled towards the other tee. Keep in mind, that due to friction, pulling tees is way slower while they are standing on the floor. In contrast to hooking a tile, a hook on another tee only lasts 1.25 seconds. Once the timer runs out, the hook will release from the tee. When touching the endless hook tile , this time restriction gets removed and you can hook other tees forever. This effect only wears of by touching the endless hook off tile . When loosing endless hook through this tile and currently holding hook, you still hold the remaining hook duration from that point in time. The endless hook effect can also be enabled map-wide by adding the map config sv_endless_drag 1 or by placing the endless hook map config tile somewhere on the map.

Hooking tees can be disabled by touching the disable hook collision block . Your hook will go through other tees when in this mode. Hook collision gets enabled again by touching the enable hook collision block . The hook can be permanently disabled on a map with the tune player_hooking 0 or by placing the disable hook collision map config tile somewhere on the map.

Pull limit of the hook

You will not be pulled all the way to the anchor point. Instead, when your tee enters a specific radius to the anchor point you will not be affected by the hook until you get out of it again. This is especially significant when trying to move along the ceiling. Try to re-hook the ceiling when your tee is directly below it, to stick tighter to it.

Hook hitbox of tees

The hit box of tees for the hook is actually larger than it is visually represented. While a tee looks about the same size as a tile and mostly also interacts that way, its hit box for the hook is much more generous. Due to this large hit box it is possible to hook a tee through a corner between tiles without having to do a hook with surgical precision. To see how big the actual hit box of tees are, you can turn on "fat skins" in Settings -> Tee -> Fat skins (DDFat).

Weak hook / strong hook

When hooking other tees, you won’t always pull them with the same strength. There are 2 different strength modes your hook can have, called "weak hook" and "strong hook". It is important to emphasize that a single tee does not "have strong hook" on everyone equally, they instead have either weak hook or strong hook on different tees, depending on spawn order. The tee that has strong hook on the other is determined by who spawned first. The tee that spawned first has strong hook and the one who spawned later has weak hook.

Weak and strong hook are especially noticeable in parts where you hook the other tee along the floor and when hammerflying.

Maps requiring weak

Most parts are easier (or sometimes only possible) with strong hook. There are very few parts on older maps where weak is an advantage or only possible with weak.

Known list of parts with weak as advantage or required (incomplete):

On Insane 3 at tele 6: this part is only possible with weak hook. This is due to the speedups not being strong enough to push the tee up when using the strong hook.
On 2Long at position x = 380, y = 33: you have to do an edge hook with strong hook. With weak it is enough if the other tee holds right (by default, D).
On Fucktastic at tele 30: Similar to the 2Long part, but three times in a row and the edge is to high to jump on it.
On Next at tele 4: The tee holding the hook needs weak for hook to have enough upward momentum

Tunes

The following tunes exist for the hook:


tune name	default value	comment
hook_length	380.0	Length of the hook. This is how far the hook can get before retracting. The length is always measured from the current position of the tee or the last hook teleporter.
hook_fire_speed	80.0	How far the hook advances each tick
hook_drag_accel	3.0	Factor to acceleration the hook gives each tick
hook_drag_speed	15.0	Maximum speed you can gain/give through the hook afterwards the accel is ignored
player_hooking	1	Enable/disable player hooking
hook_duration	1.25	Time in seconds how long tees can hook other tees

Advanced Behaviour

The hook has a maximum range. Once the hook reaches its maximum range, it will reset. Note that if you move away from the hook, that maximum range is reached faster, and you won’t hook as far. However, you can hook further by moving into the general hook direction.
The hook does not start directly at the border of your tee. Instead, it starts a bit further out, which makes it easier to hook through a gap between tiles when you are close to it.